■機械工学専攻 業績一覧 2013年
〔査読付学術原著論文〕 18件
題      目 著  者 掲載誌,巻,号,頁(発表年月)
Effect of impact angle on liquid droplet impingement erosion S.Hattori, M. Kakuichi Wear, 298-299, 1-7 (2013)
Cavitation erosion of silver plated coatings considering thermodynamic effect S.Hattori, K. Taruya, K. Kikuta, H. Tomaru Wear, 300, 136-142 (2013)
Friction and wear properties of lead-free aluminum alloy bearing material with molybdenum disulfide layer by a reciprocating test T. Miyajima, Y. Tanaka, Yoshiro Iwai, Y. Kagohara, S. Haneda, S. Takayanagi, H. Katsuki Tribology International, 59, 17-22 (2013)
Effect of temperature on cavitation erosion of 9Cr steel in liquid metal S.Hattori, A. Nimura, H. Yada Wear, 303, 269-275 (2013)
Thermal decomposition of 2-phenylethanol: A computational study on mechanism Yasuyuki Sakai, Hiromitsu Ando, Tatsuo Oguchi, Yoshinori Murakami Chem. Phys. Lett., 556, 29-34 (2013.01)
制御教育用教材 MCORE-IP の紹介と活用事例 川谷 亮治, 高田直人 工学教育, 61, 2, 67-72 (2013.02)
A LES Modification for Turbulent Flows of Surfactant Solutions T.Ohta, Y.Usui Journal of Fluid Science and Technology, 8, 1, 54-64 (2013.03)
アルカン燃料の分子構造と着火遅れ時間の関係 (第2報) 酒井 康行, 浅野 悠介, 安東 弘光, 桑原 一成 自動車技術会論文集, 2, 44, 363-368 (2013.03)
高希釈混合気の着火過程に関する化学反応論的研究 多田 卓矢, 桑原 一成, 古谷 正広, 酒井 康行, 安東 弘光 自動車技術会論文集, 2, 44, 375-380 (2013.03)
教材用2足歩行模型の構造パラメータを設定する教育方法 山田 哲也, 鞍谷 文保, 前田 浩司 日本産業技術教育学会誌, 55, 1, 35-42 (2013.04)
所望のSEAパラメータを実現する要素形状の適正化 黒田 勝彦, 山崎 徹, 鞍谷 文保 日本機械学会論文集 C編, 79, 800, 1012-1023 (2013.05)
スポット溶接位置のばらつきが薄板構造物の振動特性に及ぼす影響 松原 和平, 鞍谷 文保, 鷲尾 宰司, 倉光 俊喜雄 日本機械学会論文集 C編, 79, 800, 1582-1593 (2013.05)
Chemical Kinetcs Study on Two-Stage Main Heat Release in Ignition Process of Highly Diluted Mixtures Kazunari Kuwahara, Takuya Tada, Masahiro Furutani, Yasuyuki Sakai, Hiromitsu Ando SAE Technical Paper, 1, 6, 520-532 (2013.05)
数値シミュレーション援用抵抗ろう付法によるTi-Ni合金とステンレス鋼のマイクロ接合 竹下 晋正, 伊藤 拓 溶接学会論文集, 31, 2, 126-132 (2013.05)
Dependence of precipitate formation on normalizing temperature and its impact on the heat treatment of F82H-BA07 Steel Ken-ichi Fukumoto, T. Sakaguchi, K. Inoue, T.Itoh, H. Sakasegawa, H. Tanigawa Journal of Nuclear Materials, 442, S23-32 (2013.11)
液中にある粒子挙動に及ぼす円形平面音源超音波の影響* (マイクロバブルとアクリル粒子の分布と速度) 太田  淳一, 堂山 直紀, 若林 大翔, 鈴木 宏彰 日本機械学会論文集B編, 79, 807, 2397-2408 (2013.11)
Structural Optimization of Subsystems to Realize Desired SEA Parameters K.Kuroda, T.Yamazaki, F.Kuratani Journal of System Design and Dynamics, 7, 4, 539-551 (2013.12)
ヒートパイプBACH による浅層地中熱利用液体タンク保温補助システム 永井 二郎, 計 縈贏, 高野 武史, 出所 敏美 日本機械学会論文集(B編), 79, 808, 2548-2551 (2013.12)
〔査読付国際会議論文(アブストラクト審査含む)〕 11件
題      目 著  者 掲載誌,巻,号,頁(発表年月)
Development of Gasoline Combustion Reaction Kohtaro Hashimoto, Mitsuo Koshi, Akira Miyoshi, Yoshinori Murakami, Tatsuo Oguchi, Yasuyuki Sakai, Hiromitsu Ando, Kentaro Tsuchiya SAE Technical Paper, 2013-01-0887,  (2013.04)
A Computational Study on the Oxidation Reaction Pathways of Diethyl Ether in the Internal Combustion Engines SAKAI Yasuyuki, ANDO Hiromitsu 9th Asia-Pacific Conference on Combustion,  (2013.05)
Evaluation of friction damping in jointed plates with partially overlapping interfaces F. Kuratani, K. Koide, T. Hirai, I. Kido Proc. of the 15th Asia Pacific Vibration Conference, 1079-1084 (2013.06)
Damping in Jointefd Friction Plates with Partially Overlapping Interfaces F. Kuratani, T. Hirai, K. Koide, I. Kido Proc. of 11th International Conference on Recent Advances in Structural Dynamics,  (2013.07)
Mechanical Weeding Using a Paddy Field Mobile Robot for Paddy Quality Improvement Y.Yamada, K.Iwakabe, G.Liu, T.Uejima Proc. of the 14th Towards Autonomous Robotic Systems (TAROS2013), Oxford, UK, 069 1-2 (2013.08)
Development of a Paddy Field Mobile Robot for the Purpose of Paddy Quality Improvement K.Iwakabe, G.Liu, Y.Yamada, T.Uejima Proc. of the SICE Annual Conference 2013 (SICE2013), Nagoya, Japan, MoBT13.3 1618-1622 (2013.09)
Autonomous Navigation of a Paddy Field Robot Using Image Sensor and Hybrid Control M.Nakayama, Y.Yamada, T.Uejima Proc. of the SICE Annual Conference 2013 (SICE2013), Nagoya, Japan, MoBT13.4 1623-1628 (2013.09)
An Automatic Wireless Capture System of a Corral Trap for Capturing Deer S.Sekino, Y.Yamada Proc. of the SICE Annual Conference 2013 (SICE2013), Nagoya, Japan, MoBT13.5 1629-1634 (2013.09)
Automatic Capturing System of Cage Traps for Medium-Sized Destructive Animals: Reduction Method of Unintentionally Catch Y.Shimizu, Y.Yamada Proc. of the SICE Annual Conference 2013 (SICE2013), Nagoya, Japan, MoBT13.6 1635-1640 (2013.09)
Performance Evaluation of Concentrated Ventilation in a Tunnel Fire Futoshi TANAKA, Shohei Majima, Masahiro Kato, Nobuyoshi Kawabata Proceedings of the 14th Asia Congress of Fluid Mechanics - 14ACFM,  (2013.10)
Unsteady Lift Generation by a Two-Dimensional Wing in Flapping Motion Tomoharu Dengo, Takayuki Aoki, Futoshi TANAKA Proceedings of the 14th Asia Congress of Fluid Mechanics - 14ACFM,  (2013.10)
〔論文(その他)〕 18件
題      目 著  者 掲載誌,巻,号,頁(発表年月)
Experiments about Visibility in a Fire Incident using a Large Scale Model Tunnel M.Seike, N.Kawabata, M.Hasegawa, Futoshi TANAKA Proceedings of the 5th JAPAN/TAIWAN/KOREA JOINT SEMINAR for Tunnel Fire and Management, 7-11 (2013.11)
Effectiveness of Point Extraction Ventilation in a Tunnel Fire Futoshi TANAKA, S. Majima, M. Kato, N. Kawabata Proceedings of the 5th JAPAN/TAIWAN/KOREA JOINT SEMINAR for Tunnel Fire and Management, 13-16 (2013.11)
PERFORMANCE VALIDATION OF NATURAL VENTILATION DURING A FIRE IN A SHALLOW URBAN ROAD TUNNEL WITH SHAFTS Takayuki Aoki, Hiroki Yamazaki, Futoshi TANAKA Proceedings of 2013 International Symposium on  ISAMPE,  (2013.11)
MOVEMENT OF BUOYANCY DRIVEN SMOKE FLOW IN A TUNNEL FIRE Daichi Yajima, Futoshi TANAKA Proceedings of 2013 International Symposium on  ISAMPE,  (2013.11)
PREDICTION OF THE CRITICAL VELOCITY BY LONGITUDINAL VENTILATION IN A TUNNEL FIRE Kouhei Takezawa, Futoshi TANAKA Proceedings of 2013 International Symposium on  ISAMPE,  (2013.11)
FIRE SUPPRESSION WITH WATER SPRAYS Wataru Mizukami, Chao Mu, Futoshi TANAKA Proceedings of 2013 International Symposium on  ISAMPE,  (2013.11)
Design and Implementation of a Paddy Field Mobile Robot for the Purpose of Paddy Quality Improvement K.Iwakabe, D.Kunii, S.Nakai, Y.Yamada, T.Uejima Proc. of 2013 Int. Symp. on Advanced Mechanical Engineering and Power Engineering (ISAMPE2013), Fukui, Japan, Poster 4-08, pp.1-6 (2013.11)
Automatic Capturing System of Cage Traps for Medium-Sized Destructive Animals: Recognition by Histograms of Oriented Gradients Y.Shimizu, Y.Yamada Proc. of 2013 Int. Symp. on Advanced Mechanical Engineering and Power Engineering (ISAMPE2013), Fukui, Japan, Poster 4-09, pp.1-6 (2013.11)
Mechanization and Automation of Cultivation Process of Tomato Plants M.Oonishi, Y.Yamada Proc. of 2013 Int. Symp. on Advanced Mechanical Engineering and Power Engineering (ISAMPE2013), Fukui, Japan, Poster 4-10, pp.1-4 (2013.11)
Non-Contact Measurement System Using Kinect for Medical Care H.Kishishita, Y.Yamada Proc. of 2013 Int. Symp. on Advanced Mechanical Engineering and Power Engineering (ISAMPE2013), Fukui, Japan, Poster 4-11, pp.1-4 (2013.11)
Design and Implementation of an Automatic Wireless Capture System of an Corral Trap for Capturing Deer S.Sekino, Y.Yamada Proc. of 2013 Int. Symp. on Advanced Mechanical Engineering and Power Engineering (ISAMPE2013), Fukui, Japan, Poster 4-12, pp.1-7 (2013.11)
Hybrid Control System of a Paddy Field Mobile Robot M.Nakayama, Y.Yamada, T.Uejima Proc. of 2013 Int. Symp. on Advanced Mechanical Engineering and Power Engineering (ISAMPE2013), Fukui, Japan, Poster 4-13, pp.1-6 (2013.11)
Feasibility Study on Floor Heating and Cooling Air-Conditioning System by Heat Pipe BACH (Bubble Actuated Circulating Heat Pipe) in Top or Bottom Heat Mode Susuki, K., Nagai, N. Proc. 2013 International Symposium on Advanced Mechanical and Power Engineering, 1-3 (2013.11)
Heat Transfer Characteristics of a New Type Heat Pipe BACH for High-temperature Applications Ji, Y.Y., Nagai, N. Proc. 2013 International Symposium on Advanced Mechanical and Power Engineering, 1-4 (2013.11)
Visual Observation of Liquid-Solid Contact Situations during Spray Cooling of Hot Surface Ota, H., Nagai, N., Nikaido, H., Serizawa, Y. Proc. 2013 International Symposium on Advanced Mechanical and Power Engineering, 1-2 (2013.11)
Grasp of Heat Transfer Characteristics of Spraying and Jet Cooling of Steel Plate (Influence of Surface Oxide Film) Ochiai, R., Nagai, N. Proc. 2013 International Symposium on Advanced Mechanical and Power Engineering, 1-2 (2013.11)
Research of the air-conditioning system using BACH (Bubble Actuated Heat Pipe) of the cabinet Li, W.K., Nagai, N. Proc. 2013 International Symposium on Advanced Mechanical and Power Engineering, 1-3 (2013.11)
アーク溶接した鋼材の溶接変形に及ぼすシールドガスの影響 竹下 晋正, 齋藤 努 福井大学大学院工学研究科研究報告,60, 13-18 (2012.03)
〔講 演〕 76件
題      目 発 表 者 講演会予稿集,発表番号,頁(発表年月)
画像処理による超音波照射下の液相と気相の流れの同時計測 岩本翔平, 藤井佑貴 大学院生(福井大学), 三浦清貴 大学生(福井大学), 太田淳一 北陸流体工学研究会, 富山県立大学, 54-55 (2013.03)
円筒容器内に生じる気泡を伴う音響流 (気相と液相の速度測定) 藤井 佑貴, 岩本 翔平(大学院生(福井大学)), 太田  淳一 日本機械学会 北陸信越支部 第50期総会・講演会, 54-55 (2013.03)
極限荷重解析による減肉管の破裂内圧評価および評価法が有する裕度の把握 小嶋 龍太郎, 飯井  俊行 日本機械学会北陸信越学生会 第42回学生員卒業研究発表講演会, 504, 福井市, 講演論文集(USB-memory), 1-2 (2013.03)
遷移温度域にある材料の破壊靱性値板厚効果 高村 亮太, 飯井  俊行 日本機械学会北陸信越学生会 第42回学生員卒業研究発表講演会, 513, 福井市, 講演論文集(USB-memory), 1-2 (2013.03)
減肉配管の有限要素解析結果に対する内圧破裂評価基準の提案 吉井 貫, 飯井  俊行 日本機械学会北陸信越学生会 第42回学生員卒業研究発表講演会, 512, 福井市, 講演論文集(USB-memory), 1-2 (2013.03)
短時間フーリエ変換を用いたシンバル音の特性解析 小川 渉, 鞍谷 文保, 浜手 翔, 工藤 倫久, 小出 俊雄 日本機械学会北陸信越支部第50期総会・講演会, 福井市,  (2013.03)
部分的な接触部を有する平板構造物の摩擦減衰特性評価法 平居 嵩朗, 鞍谷 文保, 小出 一志, 城戸 一郎 日本機械学会北陸信越支部第50期総会・講演会, 福井市,  (2013.03)
KINECT を用いた上肢の計測 佐々木 崇, 川谷 亮治 日本機械学会北陸信越支部第50期総会・講演会, 1303, 福井市,  (2013.03)
横臥時間をモニタするシステムの開発 大谷 奈緒, 清水 章博, 川谷 亮治, 高田 直人, 小林 義文 日本機械学会北陸信越学生会第42回学生員卒業研究発表講演会, 0411, 福井市,  (2013.03)
車輪型倒立振子系に対するスライディングモード制御 Wan Mohamad Farhan, 川谷 亮治 日本機械学会北陸信越学生会第42回学生員卒業研究発表講演会, 0201, 福井市,  (2013.03)
直列多重型倒立振子系の安定化制御 八十山 輝彦, 川谷 亮治 日本機械学会北陸信越学生会第42回学生員卒業研究発表講演会, 0202, 福井市,  (2013.03)
鋼板スプレー冷却時の熱伝達特性 松尾 太資, 落合 良太, 永井 二郎 日本機械学会北陸信越支部第50期総会・講演会, 1103, 福井市, USBメモリ, pp.1-2 (2013.03)
高温面のスプレー冷却時における固液接触状況の観察 太田 裕紀, 酒井 一成, 永井 二郎, 二階堂 仁之, 芹澤 良洋 日本機械学会北陸信越支部第50期総会・講演会, 1104, 福井市, USBメモリ, pp.1-2 (2013.03)
トップ・ボトムヒート切替可能BACH の熱輸送特性 塚本 充紀, 鈴木 恵祐, 永井 二郎 日本機械学会北陸信越支部第50期総会・講演会, 1108, 福井市, USBメモリ, pp.1-2 (2013.03)
ヒートパイプBACH による防火水槽鉄蓋周辺融雪システム 三田村 拓哉, 永井 二郎, 前川 義和, 谷口 晴紀 日本機械学会北陸信越支部第50期総会・講演会, 1109, 福井市, USBメモリ, pp.1-2 (2013.03)
SUS304 ステンレス鋼の振動キャビテーション壊食に及ぼす液 温と圧力の影響 江尻和広, 本井嘉浩, 服部修次 日本機械学会 北陸信越支部 第50 期総会・講演会,  (2013.03)
液体金属中のキャビテーション壊食損傷 挙動評価 服部 修次, 小林佑也, 仁村彰宏, 矢田浩基 日本原子力学会「2013年春の年会」,  (2013.03)
Development of Gasoline Combustion Reaction Model Kohtaro Hashimoto, Mitsuo Koshi, Akira Miyoshi, Yoshinori Murakami, Tatsuo Oguchi, Yasuyuki Sakai, Hiromitsu Ando SAE 2013 World Congress & Exhibition,  (2013.04)
Chemical Kinetics Study on Two-Stage Main Heat Release in Ignition Process of Highly Diluted Mixtures Kazunari Kuwahara, Takuya Tada, Masahiro Furutani, Yasuyuki Sakai, Hiromitsu Ando SAE 2013 World Congress & Exhibition,  (2013.04)
加速度センサを利用した横臥時間計測システムの開発 清水 章博, 大谷 奈緒, 川谷 亮治, 高田 直人, 小林 義文 ROBOMECH 2013 in TSUKUBA, 1P1-E01, つくば市,  (2013.05)
ヒートパイプBACH を用いた防火水槽鉄蓋周辺融雪システムの検討 永井 二郎, 三田村 拓哉, 前川 義和, 谷口 晴紀 第50回日本伝熱シンポジウム, G224, 仙台市, 講演論文集, II, pp.428-429 (2013.05)
A Computational Study on the Oxidation Reaction Pathways of Diethyl Ether in the Internal Combustion Engines SAKAI Yasuyuki, ANDO Hiromitsu 9th Asia-Pacific Conference on Combustion,  (2013.05)
燃焼ロバスト性を考慮した圧縮着火機関の燃料設計 田中 大樹, 染澤 俊介, 佐古 孝弘, 酒井 康行, 安東 弘光, 多田 卓矢, 桑原 一成 自動車技術会2013年春季大会,  (2013.05)
アルカンの低温酸化反応を阻害する4つのバイパスの寄与 浅野 悠介, 安東 弘光, 酒井 康行, Khoo PeiLoon, 桑原 一成 自動車技術会2013年秋季大会,  (2013.05)
アルカンのオクタン価を決定する要因 安東 弘光, 酒井 康行, 浅野 悠介, 坂出 直紀, 桑原 一成 自動車技術会2013年秋季大会,  (2013.05)
表面形状に注目したポンプ補修材料のキャビテーション壊食 服部 修次, 寳澤 賢, 中本 浩章, 能見 基彦, 早房 敬祐 ターボ機械協会 第69回総会講演会,  (2013.05)
Evaluation of friction damping in jointed plates with partially overlapping interfaces F.Kuratani, K.Koide, T.Hirai, I.Kido 15th Asia Pacific Vibration Conference, ICC Jeju, Korea,  (2013.06)
ヒートパイプBACHによる浅層地中熱利用液体タンク保温補助システム 永井 二郎, 計 縈贏, 高野 武史, 出所 敏美 第18回動力・エネルギー技術シンポジウム, A233, 千葉市, pp.245-246 (2013.06)
気泡駆動型循環式ヒートパイプによる無動力地中熱源活用技術の開発 永井 二郎 福井雪技術研究会 現場見学会, 敦賀市,  (2013.06)
Visualization of Liquid-Solid Contact Situations while Boiling Nagai, N. 日本機械学会熱工学部門相変化研究会, 札幌市,  (2013.06)
炭素鋼,ステンレス鋼のスプレーノズルによる液滴衝撃エロージョンの流速依存性 服部 修次, ムハンマド アダム 日本機械学会第18回動力・エネルギー技術シンポジウム, D103, 横浜市, 講演論文集, 13-10, 99-102 (2013.06)
配管減肉管理法の改良・実用化に向けた調査研究(2) 中村 晶, 服部 修次 日本機械学会第18回動力・エネルギー技術シンポジウム, D212, 横浜市, 13-10, 349-350 (2013.06)
Damping in Joinefd Friction Plates with Partially Overlapping Interfaces F.Kuratani, T.Hirai, K.Koide, I.Kido 11th International Conference on Recent Advances in Structural Dynamics,  (2013.07)
2次方程式で鉄球が浮上する!? 川谷 亮治, 高田 直人 The 17th TTT Japan Annual Meeting, A-1, 東京, 54-55 (2013.08)
摩擦・摩耗 岩井 善郎 文部科学省GRENE事業 先進環境材料分野:グリーントライボネットワーク 夏の学校2013, 京都大学 宇治キャンパス,  (2013.08)
部分的な接触部を有する平板構造物の減衰推定 平居 嵩朗, 鞍谷 文保, 小出 一志, 城戸 一郎 日本機械学会Dynamics and Design Conference 2013, 九州産業大学(福岡市),  (2013.08)
超音波プラスチック溶接における被溶接物の振動特性の影響 小出 一志, 平居 嵩朗, 鞍谷 文保, 菊池 健, 杉村 範和, 中山 久美子 日本機械学会Dynamics and Design Conference 2013, 九州産業大学,  (2013.08)
XCOSを利用した制御教育システムの開発 川谷 亮治, 高田直人 工学・工業教育研究講演会第61回年次大会, 5-217, 新潟市, 344-345 (2013.08)
SUS304ステンレス鋼を用いたキャビテーション壊食の温度依存性 服部 修次, 本井 嘉浩, 江尻 和弘 混相流シンポジウム2013, F311, 長野市,  (2013.08)
お湯が沸くしくみ 〜 沸騰現象の概略と調理との関係 〜 永井 二郎 日本調理科学会 平成25年度大会 加熱調理委員会主催勉強会, 奈良市, 1-12 (2013.08)
非ニュートン粘性流体乱流の組織的構造とLESによる予測 宮下 真人, 太田 貴士 日本機械学会 2013年度年次大会,  (2013.09)
一様に溶融,凝固する壁に沿う乱流境界層の観 察 山田 敬祐, 太田 貴士 日本機械学会 2013年度年次大会,  (2013.09)
垂直方向に振動する壁に沿う乱流のDNS 森 陽介, 太田 貴士, 山本 智, 濱本 直樹, 奥津 泰彦 日本流体力学会 年会2013,  (2013.09)
海水管ライニング用ポリエチレンと高経年化材のキャビテーション壊食 服部 修次, 紅谷 英祐 ターボ機械教会第70回講演会, 2-14, 長野市,  (2013.09)
ラミナー冷却時の固液接触発生状況可視化と表面酸化膜が噴霧冷却特性に及ぼす影響 永井 二郎, 大西 宏紀, 松尾 太資 日本鉄鋼協会第166回秋季講演大会, 金沢市, Vol.26, No.2, 548-551 (2013.09)
延性‐脆性遷移温度域材料の破壊靭性値の板厚効果に関する研究(標準試験片に対する(4δt, σ22c)破壊評価基準の適用性検討) 藤原 悠輝, 飯井 俊行 日本機械学会M&M2013材料力学カンファレンス, GS43, 岐阜市, CD-ROM, 1-5 (2013.10)
着火ロバスト性を考慮した圧縮着火機関の燃料設計(第2報) 田中 大樹, 染澤 俊介, 佐古 孝弘, 酒井 康行, 安東 弘光, 桑原 一成 自動車技術会2013年秋季大会,  (2013.10)
地中熱源利用トップ・ボトムヒートパイプBACHの熱輸送特性 鈴木 恵祐, 塚本 充紀, 永井 二郎 日本機械学会 熱工学コンファレンス2013, C213, 弘前市, 329-330 (2013.10)
Modeling of Plate Structures with Bolted Joints B.Zhang, F.Kuratani ISAMPE 2013, Fukui(Japan),  (2013.11)
Effect of  Vibration Mode of Work Pieces on  Ultrasonic Plastic Welding K.Koide, T>HIrai, F.Kuratani ISAMPE 2013, Fukui(Japan),  (2013.11)
Vibration and Acoustic Analysis of Crash Cymbal N.Kudo, S.Hamate, W.Ogawa, F.Kuratani ISAMPE 2013, Fukui(Japan),  (2013.11)
Comparison of Vibration Characteristics of  Plates with Different Joining Method S.Izumidai, F.Kuratani, K.Furuya ISAMPE 2013, Fukui(Japan),  (2013.11)
Simple Estimation Method for Damping of Jointed Plates with Partial Overlap Region T.Hirai, K.Koide, F.Kuratani ISAMPE 2013, Fukui(Japan),  (2013.11)
Experimental Analysis of Crash Cymbal Sound S.Hamate, N.Kudo, W.Ogawa, F.Kuratani ISAMPE 2013, Fukui(Japan),  (2013.11)
Development of measurement system of upper-limb using KINECT T.Sasaki, R.Kawatani ISAMPE 2013, Fukui(Japan),  (2013.11)
Vibration control of a flexible arm based on the minimum variance control strategy A.Shimizu, R.Kawatani ISAMPE 2013, Fukui(Japan),  (2013.11)
Control of mobile robot by Android devices T.Nakagita, R.Kawatani ISAMPE 2013, Fukui(Japan),  (2013.11)
The Structures of Acoustic Sound Sources in a Turbulent Boundary Layer H.Ishiguro, T.Ohta The 2013 International Symposium on Advanced Mechanical and Power Engineering,  (2013.11)
Investigation of Turbulent Flow along a Wall Oscillating in the Normal Direction by DNS Y.Mori, T.Ohta, S.Yamamoto, N.Hamamoto, Y.Okutsu The 2013 International Symposium on Advanced Mechanical and Power Engineering,  (2013.11)
Effect of Impact Velocity on Liquid Droplet Impingement Erosion of Carbon Steels and a Stainless Steel Using Spray Nozzle Muhammad Adam, S.Hattori International Symposium on Advanced Mechanical and Power Engineering, 1-15, 福井市,  (2013.11)
配管材料の液滴衝撃(LDI)エロージョンについて 服部 修次 日本材料学会第314回疲労部門委員会, 敦賀市,  (2013.11)
福井大学のCOCの取組み「福井のカニ殻伝承農法の啓蒙と希少野生生物の保護増殖活動による里地里山学の推進と人材育成」 藤井 豊, 川内 一憲, 田中 幸枝, 長谷川 巌, 木元 久, 淺原 雅浩, 川井 昌之, 百崎 孝男, 田中 俊之, 小鍛治 優 福井陸水生物研究会, 福井市,  (2013.12)
天然ガス各成分の着火特性に関する化学反応論的解析 桑原 一成, 多田 卓矢, 田中 大樹, 佐古 孝弘, 酒井 康行, 古谷 正広 第51回燃焼シンポジウム,  (2013.12)
ジエチルエーテル平坦バーナー低温度炎で発生する多還芳香族生成挙動に飽和脂肪族炭化水素添加が及ぼす影響 栄嶋 昌輝, 古谷 正広, 桑原 一成, 酒井 康行 第51回燃焼シンポジウム,  (2013.12)
ジエチルエーテルの燃焼化学反応モデリング:量子化学計算による低温酸化反応経路の推定 酒井 康行, 安東 弘光, Ravi Fernandes 第51回燃焼シンポジウム,  (2013.12)
炭化水素燃料の自着火特性に及ぼす蒸発特性の影響 大嶋 元啓, 酒井 康行 第22回微粒化シンポジウム,  (2013.12)
TK400 toolbox とその適用例の紹介 川谷 亮治, 高田 直人 SI2013, 神戸市,  (2013.12)
低マッハ数乱流境界層における密度変動大規模構造のダイナミクス 石黒 秀和, 宮下 真人, 太田 貴士 第27回数値流体力学シンポジウム,  (2013.12)
圧縮性液体乱流境界層の再現と渦キャビテーション崩壊圧力波の観察 三田村 将, 太田 貴士 第27回数値流体力学シンポジウム,  (2013.12)
Cavitation erosion of silver plated coating at different temperatures and pressures S.Hattori, Y. Motoi 8th International Symposium on Measurement Techniques for Multiphase Flows (ISMTMF' 2013), Guanzhou (China),  (2013.12)
非比例多軸低サイクル疲労下における改良9Cr-1Mo鋼の微視組織変化 齋藤大地, 伊藤 隆基, 福元 謙一 日本機械学会M&M2011材料力学カンファレンス,  (2012.07)
LES による非ニュートン粘性流体壁乱流の予測 太田 貴士, 笛吹  祐登 日本機械学会 2012年度年次大会,  (2012.09)
Structures of Density Fluctuations at a Low-Mach-Number Turbulent Boundary Layer by DNS T.Ohta, H.Kajima 7th  International  Symposium  on  Turbulence,  Heat  and  Mass  Transfer, Cicily(Italy),  (2012.09)
DNS of Turbulent Boundary Layers with Meting and Solidification K.Yamada, T.Ohta The 2012 International Symposium on Advanced Mechanical and Power Engineering,  (2012.11)
弱圧縮性流れ解法によるキャビテーション挙動に伴う圧力波の予測 三田村  将, 太田 貴士 キャビテーションに関するシンポシウム(第16回),  (2012.11)
非ニュートン粘性流体壁乱流のためのLES 宮下 真人, 太田 貴士 第26回数値流体力学シンポジウム,  (2012.12)
〔資料・解説等〕 7件
題      目 著  者 掲載誌,巻,号,頁(発表年月)
メカトロ教育用マイコンボードとその活用事例の紹介 川谷 亮治 北陸信越工学教育協会会報, 61, 70-73 (2013.03)
すり減りをプリント配線の断線で計測するオンライン摩耗センサ 岩井 善郎, 峠 正範 OHM, 100, 8, 10-11 (2013.08)
プラスチックの耐傷付性を摩擦・摩耗からみると 岩井 善郎 成形加工, 25, 8, 357 (2013.08)
鉄鋼材料表面処理評価へのMSE試験法の新たな適用 勝俣力, 松原 亨, 岩井 善郎 月刊トライボロジー, 312, 30-32 (2013.08)
薄膜強度試験法の開発で思うこと 岩井 善郎 月刊トライボロジー, 312, 11 (2013.08)
セラミック硬質薄膜の表面強度特性評価 岩井 善郎 セラミックス, 48, 9, 727-731 (2013.09)
摩耗センサによるオンライン監視システム ―摺れ合う部材の摩耗量を直接検出する摩耗センサの開発― 岩井 善郎, 峠 正範 検査技術, 11, 42-45 (2013.11)
〔学会等の開催〕 2件
名      称 担 当 者 開催地(年月)
トライボロジー会議2013春 東京 本田知己 東京都 (2013.05)
2013 International Symposium on Advanced Mechanical and Power Engineering & International Collaboration Seminar (ISAMPE & ICS 2013) Nagai, N. 福井市 (2013.11)